This site is a part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

26 - 27 JUNE 2025
HALL 1 BENGALURU INTERNATIONAL EXHIBITION CENTRE, BANGALORE
Announcement :

100 + Safety and Health Equipment Manufacturers participating in OSH South India – Bangalore.

Visit OSH South India – Bangalore and avail reimbursement for your train travel.

South India’s Largest Occupational Safety & Health show is back in Chennai, June 27 – 28, 2024, Hall no. 1, Bangaluru International Exhibition Centre, Bangalore.. Book your stall in best Location : 7045909099.

Live demonstrations, Latest Innovations, Global Experts, Certification workshops.

Explore PPE such as hard hat, safety gloves, gas mask, safety shoes, work wear, safety harness under one Roof.

How Do We Deal With An Accidental Flocculant Spill?

Flocculants are polymers that are mainly used in the treatment of wastewater containing suspended particles. During a spill, the ground surface soiled by flocculants becomes extremely slippery. If cleaning is not carried out perfectly, mere contact with water can cause a serious fall hazard. In this article, discover the nature of flocculants, where they are used and our spill management advice.

WHAT IS COAGULATION AND FLOCCULATION?

Coagulation and flocculation are two water treatment stages used together to separate solid particles suspended in cloudy water. Even if they have a complementary role, the coagulation and flocculation processes should not be confused because they do not involve the same chemicals or mechanisms.

Coagulation

is carried out using metallic mineral salts, called coagulating agents, containing iron or aluminium such as ferric chloride FeCl3. Naturally, some suspended solid particles are electrically charged (+ or -) and therefore repel each other, they cannot agglomerate. Coagulation agents balance these charges and therefore allow solid particles to come together.

Flocculation

is a physical-chemical phenomenon during which solids suspended in a liquid agglomerate to form flakes (also called flocs). These flakes then settle quickly or rise to the surface of the liquid, allowing them to be easily separated from the rest of the liquid. Flocculation is a natural phenomenon that can be accelerated by using chemicals called flocculants or flocculation agents.

FLOCCULANTS

There are several types of flocculants, which can be anionic (negatively charged), cationic (positively charged) or non-ionic (uncharged). The most common flocculants are based on a polymer, polyacrylamide. They can be marketed in solid, liquid or emulsion form, the main producers of flocculants in Europe are: Kemira, SNF Floerger, BASF, Solenis, Solvay.

In the industrial field,

the water treatment sector uses the most flocculants. They are used in the treatment of sludge but also in drinking water clarification. As the paper industry is a water-intensive activity that produces sludge, flocculants are also frequently used.

Among consumers,

flocculants are used to give clarity to cloudy pool water. When a flocculant is added, the solid particles are consolidated and then filtered

WHAT ARE THE DISADVANTAGES OF USING FLOCCULANTS ?

Despite their very high effectiveness, flocculants suffer a major disadvantage: In the event of a spill or if residue sticks to the bottom of a shoe, the slightest contact with water can be disastrous. In contact with water, the flocculant dissolves and forms a viscous gel that is similar to hair gel. This gel then transforms the floor into a skating rink, which greatly increases the risk of falls.

Due to their role, flocculants should be added in small proportions to a large quantity of water (less than 0.1%). They are extremely effective even when highly diluted. Consequently, after cleaning, even the tiniest flocculant residue is enough to make the floor slippery again when water is added (e.g. when cleaning or if it rains).

For this reason, to avoid an accident it is very important to completely remove all flocculant residue.

HOW DO I CLEAN A FLOOR SOILED BY A FLOCCULANT ?

In the event of a flocculant spill, washing with large amounts of water is absolutely not recommended ! This would make cleaning operations even more difficult.

POLYCAPTOR absorbent is a synthetic powder specifically developed for its drying properties and its ability to clean up viscous liquid spills such as flocculants. This absorbent is composed of ultra-porous grains that absorb the liquid to the core through capillary action. The liquid can then be fully removed and leaves no residue. Even if water is added at a later date the risk of slipping is reduced, as the flocculant residue has been removed.

There are other alternatives to manage a flocculant spill, but they have some rather restrictive drawbacks so we do not advise them :

Mineral absorbents :

Traditionally in industrial spills, mineral absorbents such as diatomaceous earth, sand or sepiolite are used to absorb the spilled liquid. They are powders consisting of crushed, slightly porous rock.

They have a reduced impact on flocculants :

  • Even though they absorb most of the liquid quite easily, they can leave a layer of residue on the ground. In the case of flocculants, this residue can be extremely hazardous, because if water is added it can cause a high risk of falling.
  • These compounds often contain a non-negligible proportion of carcinogenic crystalline silica that can be inhaled during use.

Bleach or sodium hypochlorite

can be used to break down polyacrylamide-based flocculants. As bleach is a powerful oxidizer, it will cause the scission of certain polymer chains with a loss of consistency and consequently its viscous nature. On the other hand, this operation is quite dangerous because bleach can react with other polymer functions and form hazardous volatile chloramines: Chloramines are respiratory irritants and allergenic, they can also cause long-term respiratory problems. Bleach itself is a highly reactive, corrosive chemical and should only be handled by trained personnel with appropriate protective equipment.

Subscribe Newsletter

Sign up to receive E connect email updates